DecorQuip 191695 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} DecorQuip 191695. DecorQuip 191695 7 pagina's. Roman blind lv battery motor

Pagina afdrukken
functionality.
functionality.
Hold P1
for 10sec
Hold P1
Hold P1
for 10sec
for 10sec
Note:
Switching direction using the P1 button is only available once a remote has been paired
Note:
Note:
with the motor.
Switching direction using the P1 button is only available once a remote has been paired
Switching direction using the P1 button is only available once a remote has been paired
with the motor.
with the motor.
Visit our YouTube channel for video equivalent
Visit our YouTube channel for video equivalent
Visit our YouTube channel for video equivalent
Before starting the process of pairing a handheld remote to a Dream motor, choose the channel to
Channel Zero is reserved for simultaneously controlling all blinds paired to a remote and cannot be
If using a battery powered motor, ensure that it is su� ciently charged to complete the set-up process.
2. PAIRING A REMOTE AND INITIAL SETTINGS
Press P1
for 2sec
Note:
After pairing a remote and before setting limits, the motor will be defaulted to jog-mode. To
switch to continuous-mode, see ADVANCED FUNCTIONALITY - SWITCHING BETWEEN JOG
MODE AND CONTINUOUS MODE on page 15.
SWITCHING DIRECTION
SWITCHING DIRECTION
SWITCHING DIRECTION
Motor
jogs x3
Motor
Motor
jogs x3
jogs x3
RESTORING FACTORY SETTINGS
RESTORING FACTORY SETTINGS
RESTORING FACTORY SETTINGS
Hold P1
for 14sec
Hold P1
Hold P1
for 14sec
for 14sec
WATCH THE VIDEO
1c. PAIRING A REMOTE AND INITIAL SETTINGS
DREAM RANGE PROGRAMMING INSTRUCTIONS
- OVERVIEW AND P1 FUNCTIONALITY
DREAM RANGE PROGRAMMING INSTRUCTIONS
DREAM RANGE PROGRAMMING INSTRUCTIONS
- OVERVIEW AND P1 FUNCTIONALITY
- OVERVIEW AND P1 FUNCTIONALITY
which it is to be paired.
used for pairing, programming or other adjustments
Charging a motor from empty will take approximately 6 hours.
PAIRING A REMOTE WITH A MOTOR
Motor
jogs x1
Release
Release P1
Release P1
Release P1
Motor jogs x4
Beeps x4
Motor jogs x4
Motor jogs x4
Beeps x4
Beeps x4
of these instructions.
of these instructions.
of these instructions.
Motor
beeps x1
P1
Press for 2sec
within 10s
Beeps x3
Beeps x3
Beeps x3
DIRECTION
SWITCHED
DIRECTION
DIRECTION
SWITCHED
SWITCHED
FACTORY
SETTINGS
FACTORY
FACTORY
RESTORED
SETTINGS
SETTINGS
RESTORED
RESTORED
Motor
jogs x2
beeps x3
COMPLETE
PAIRING