IKEA IUD9500WX2 Handleiding voor installatie-instructies - Pagina 12
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} IKEA IUD9500WX2. IKEA IUD9500WX2 44 pagina's. Undercounter dishwasher plastic giant tub models
Ook voor IKEA IUD9500WX2: Gebruiksaanwijzing (25 pagina's)
Pagina afdrukken
8.
If you are installing a power supply cord kit, do so now,
following kit instructions.
w
B
A. Dishwasher
wires
B. Terminal box cover
C. Cable clamp connector
Helpful Tip: Put cardboard under dishwasher until it is
installed in cabinet opening. The cardboard will help
shield the floor covering during installation.
Measure height of cabinet opening
from underside of countertop to floor
where dishwasher will be installed
(you need the lowest point).
Check chart for that height opening.
Put wheels in the required position.
Minimum
Wheel
Number
cutout
Position
of turns
height
on
front leg
34"
A
10
(86.4 cm)
341/4"
B
5
(87 cm)
341/2 ''
C
0
(87.6 cm)
D
Wheel
g.
Turn both front leveler legs to the same height.
A. Front leg
If the minimum cutout height is less than 34" (86.4 cm), the
rear wheels can be removed for additional clearance. This will
allow the dishwasher to fit into a 337/8 '' (86 cm) high cutout, but
the dishwasher will be more difficult to move into position. If
the wheels are removed, avoid damage to the floor when
moving the dishwasher.
If you have built-up floors
1=
Measure height of opening from underside of countertop to
built-up floor. If the height is at least 333/4 '' (85.7 cm), the
dishwasher will fit into the opening without modification to the
countertop or flooring.
33-343/4"
(85.7 cm)
2.
3.
A. Countertop
B. Shim
C. Built-up floor
Put wheels in position 1 and turn the front leveler legs up all
the way.
Add shims as needed in the area shown to bring dishwasher
up to the proper height.
NOTE: Make sure shims are securely attached to floor so the
dishwasher does not move when operated.
\
3/4"
6"
(7 crn)(15.2 cm)
(7 crn)
A. Shims
12