Green Tools GT-CDL20 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Green Tools GT-CDL20. Green Tools GT-CDL20 20 pagina's.

Pagina afdrukken

Description of drawing on page 2:

1. On/Off switch.

2. Rotational direction switch.

3. Torque presetting ring.

4. Keyless chuck.

5. Battery.

6. Battery unlocking button.

7. Gear switch

8. Charger.

9. Charging station.

1. General guidelines for safe operation.

Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire

and / or severe injuries. Keep these instructions in a safe place.

1.1. Safety in the workplace.

1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the

occurrence of an accident.

1.1.2. Do not operate in an environment where the cordless drill with an increased risk of an explosion

in the vicinity of flammable liquids, gases or powders.

During operation of the cordless drill can be separated sparks that can ignite powders or fumes.

1.1.3. Keep children and bystanders at a safe distance while working with the cordless drill.

If your attention is diverted, you may lose control over the cordless drill.

1.2. Safety when working with electricity.

1.2.1. Plug of the cordless drill must be suitable for contact. In no case is allowed to modify the

structure of the plug. When working with electrical zero, do not use plug adapters.

Using original plugs and sockets reduces the risk of electric shock.

1.2.2. Protect your cordless drill from rain and moisture.

Penetration of water into the cordless drill increases the risk of electric shock.

1.3. Safe way of working.

1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the

cordless drill, when you are tired or under the influence of drugs, alcohol or narcotic drugs.

A moment of distraction at work striking drill may have the effect of extremely serious injuries.

1.3.2. Work with protective work clothing and always with safety glasses.

Wearing Suitable for drilling shock and the activities of personal protective equipment, such as

respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and silencers

(hearing protectors), reduces the risk of accident.

1.3.3. Avoid the danger of switch on the cordless drill inadvertently. If, when you carry the cordless

drill, keep your finger on the trigger switch, there is the risk of accident.

1.3.4. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep

the balance. So you can control the cordless drill better and safer if unexpected situations arise.

1.3.5. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your

hair, clothes and gloves at a safe distance from rotating units of the cordless drill. Robes, jewelry, long hair

can be caught and carried away by chuck.

1.4. Care to cordless drill.

1.4.1. Do not overload the cordless drill. Use only the cordless drill in accordance with its intended

purpose. You will operate better and safer when using the appropriate cordless drill manufacturer in the

specified range of load.

1.4.2. Keep cordless drill in places where they could not be reached by children. Do not let it be used

by persons who are not familiar with how to work with it and have not read those instructions. When in the

hands of inexperienced users, the cordless drill can be dangerous.

1.4.3. Keep your cordless drill carefully. Check whether the mobile units operate impeccable, whether

it spells, if there is broken or damaged item which distort or alter the functions of the cordless drill. Before

using the cordless drill, make sure that the damaged parts to be repaired. Many accidents are caused by

poorly maintained power tools and appliances.