IKEA RENLIG Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} IKEA RENLIG. IKEA RENLIG 28 pagina's. Integrated dishwasher
Ook voor IKEA RENLIG: Gebruikershandleiding (18 pagina's), Handmatig (32 pagina's), Gebruiksaanwijzing (32 pagina's), Gebruiksaanwijzing (42 pagina's), Handmatig (20 pagina's)

Pagina afdrukken

ENGLISH

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the

button 2.

3. Press button 4:

– the appliance starts its countdown.

– The programme will start after the

selected delay has expired.

Cancelling the delayed start after having

started the programme:

1. Set the washing appliance to PAUSE by

pressing button 4.

2. Press button 2 once, the light relevant

to the selected delay goes off

3. Press button 4 again to start the pro-

gramme.

The Delay Start can not be selected with

DRAIN programme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the de-

lay time. If you need to open the door, you

must set the appliance to PAUSE (by press-

ing the button 4) and then wait a few mi-

nutes. After you have closed the door, press

the button 4 again.

Start the programme by pressing button 4

To start the selected programme, press the

button 4, the corresponding green indicator

light stops blinking. The indicator light cor-

responding to the running phase illumi-

nates. The appliance starts operating and

the door is locked.

To interrupt a programme which is running,

press the button 4: the corresponding green

indicator light starts blinking.

To restart the programme from the point at

which it was interrupted, press the button 4

again. If you have chosen a delayed start,

the appliance will begin the countdown.

If an incorrect option is selected, the red in-

dicator light of the button 4 blinks 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 4 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 4 to interrupt a programme

which is running, the corresponding green

indicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door

After the programme has started the door is

locked. If, for any reason, you need to open

it, set firstly the appliance to PAUSE by

pressing the button 4. After a few minutes it

will be possible to open the door.

If the door remains locked, this means that

the appliance is already heating or that the

water level is too high. In any case, do not

try to force the door!

If you cannot open the door but you need

to open it you have to switch the appliance

off by turning the selector dial to O. After a

few minutes the door can be opened (pay

attention to the water level and tempera-

ture!).

After closing the door, it is necessary to se-

lect the programme and options again and

to press button 4.

At the end of the programme

The appliance stops automatically. The in-

dicator light of button 4 and the indicator

light corresponding to the just finished

washing phase goes off. The light 3.3 illumi-

nates. After a few minutes the door can be

opened.