IKEA RENODLAD Handmatig - Pagina 13
Blader online of download pdf Handmatig voor {categorie_naam} IKEA RENODLAD. IKEA RENODLAD 28 pagina's.
Ook voor IKEA RENODLAD: Handmatig (32 pagina's), Handmatig (28 pagina's), Handmatig (36 pagina's), Handmatig (49 pagina's)
Pagina afdrukken
ENGLISH
indicators
,
and the display is blank.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press
.
• The indicators
are off.
• The indicator
• The display shows the current setting.
–
= the rinse aid empty
notification is deactivated.
–
= the rinse aid empty
notification is activated.
2. Press
to change the setting.
3. Press the on/off button to confirm the
setting.
The rinse aid level
It is possible to set the released quantity of
rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
,
and
flash
,
and
still flashes.
Level 0 deactivates the rinse aid dispenser
and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
.
• The indicators
off.
• The indicator
• The display shows the current setting:
e.g.
= level 4.
– The levels of rinse aid are from
0A to 6A
where level 0A means rinse aid is
not used.
2. Press
repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is complete. This
acoustic signal is activated by default and
you can deactivate it.
In addition, an acoustic signal sounds
before the AutoOpen opens the door. This
acoustic signal stops only if AutoOpen is
deactivated.
How to deactivate the acoustic signal for
the end of a programme
Make sure the appliance is in user mode.
1. Press
.
• The indicators
off.
13
,
and
are
still flashes.
,
and
are