IKEA RENODLAD Handmatig - Pagina 24

Blader online of download pdf Handmatig voor {categorie_naam} IKEA RENODLAD. IKEA RENODLAD 32 pagina's.
Ook voor IKEA RENODLAD: Handmatig (28 pagina's), Handmatig (28 pagina's), Handmatig (36 pagina's), Handmatig (49 pagina's)

Pagina afdrukken

ENGLISH

Problem and alarm code

The program lasts too long.

The remaining time in the

display increases and skips

nearly to the end of pro-

gram time.

Small leak from the appli-

ance door.

The appliance door is diffi-

cult to close.

The appliance door opens

during the wash cycle.

Rattling/knocking sounds

from inside the appliance.

The appliance trips the cir-

cuit-beaker.

Possible cause and solution

• If the delayed start option is set, cancel the delay setting

or wait for the end of the countdown.

• This is not a defect. The appliance is working correctly.

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance door is not centred on the tub. Adjust the

rear foot (if applicable).

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• Parts of the tableware are protruding from the baskets.

• The AutoOpen is activated. This function opens the ap-

pliance door during the drying phase to improve the

drying performance and let the dishes cool down. The

door remains ajar.

– The duration of the drying phase and the door

opening time vary depending on the selected pro-

gram and options.

– When the AutoOpen opens the door, the display

shows the remaining time of the running program.

If you don't want the door to automatically open, deacti-

vate AutoOpen. Refer to "Settings".

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The appliance is not levelled. Loosen or tighten the ad-

justable feet (if applicable).

• The tableware is not properly arranged in the baskets.

Refer to basket loading leaflet.

• Make sure that the spray arms can rotate freely.

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.