GAPOSA XQ40 Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} GAPOSA XQ40. GAPOSA XQ40 15 pagina's. Tubular motors with encoder electronic limits
Ook voor GAPOSA XQ40: Gebruiksaanwijzing (8 pagina's), Instructies (4 pagina's), Gebruiksaanwijzing (13 pagina's), Handmatig (16 pagina's)
Pagina afdrukken
PROGRAMMING
ADDING TRANSMITTER
Press and Hold the PROG-TX but-
1
ton of a transmitter already pai-
red until the motor starts moving.
Check the rotation of the motor,
2
then release the PROG-TX button
(the motor stops).
Within 5 seconds press the cor-
responding button (i.e. UP if the
motor rotates upwards or DOWN
if vice versa) on the new tran-
3
smitter being added.
The new transmitter has been
programmed and the rotation of
the motor has been synchronized.
2/4