GAPOSA XQ50 Handmatig - Pagina 12

Blader online of download pdf Handmatig voor {categorie_naam} GAPOSA XQ50. GAPOSA XQ50 13 pagina's. Tubular motors with mechanical limit switch and integrated receiver.
Ook voor GAPOSA XQ50: Gebruiksaanwijzing (8 pagina's), Instructies (4 pagina's), Beknopte programmeerhandleiding (7 pagina's), Handmatig (15 pagina's), Gebruiksaanwijzing (13 pagina's), Handmatig (16 pagina's), Gebruiksaanwijzing (8 pagina's)

SETTING THE LIMITS

SWITCHES

After installation and before fixing the shutter/awning at the

tube, activate the motor downwards until it stops.

ATTENTION: Check that the motor/tube turns in the right

direction.

Turn the lower screw to

so that the tube reaches

the best position for its

connection with the shutter/

awning.

Fixing the shutter/awning

at the tube and then turn

the lower adjusting screw

the exact desired "down"

position.

Open the shutter/roll up

the awning until it does not

stop and then turn the upper

screw to

awning reaches the exact

desired "up" position.

In case you need to correct the "up" limit position, because it's

over, close the shutter/roll the awning down) shortly, then turn

the upper adjusting screw to . Repeat then the sequences from

point 3.

in order to set

till the shutter/

2/2