Avantco 177ICW375 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco 177ICW375. Avantco 177ICW375 13 pagina's. Induction buffet warmers

User Manual

6. Do not pull out the power cord directly during operation. To extend the appliance's life, press the "On/Off" button first, then

unplug the power cord from the socket.

7. The fan will run to cool the heating plate even after the Unit is powered off. It is better to remove the plug after the fan stops

working.

8. When not using the Unit for a long time, remove the plug from the socket.

9. Some models will have structural design to prevent cockroaches from entering inside the Unit. If needed, you can use

mothball or equivalent cockroach repellent to protect the Unit.

Troubleshooting and Treatment

If there is any error during operation, please check the following table for common troubleshooting options before calling for

service. Below are common errors and the checks to perform.

ERROR SCENARIO

On/Off/High/Med/Low/Lock Key

indicator flash

Low Key Indicator flash

Med Key Indicator flash

High Key Indicator flash

CHECK POINTS

Incompatible or no cookware used

Low-Voltage

High-Voltage

Top plate Sensor Overheat or Short

Circuit

REMEDY

Check whether the cookware is

induction compatible or not. Ensure

you are using the correct size chafer

or cookware.

Ensure Voltage is >80V, 120V~.

Ensure Voltage is <150V, 120V~.

1. When the temperature of the

sensor overheat (which can be

caused when the temperature

of cookware is over 450°F)

during cooking, the E3 occurs;

the induction cooker needs to

be turned off and allowed to

cool. Then you can turn it

back on.

2. If E3 occurs after following the

step above, then the sensor has

failed. Please contact customer

service.