GAPOSA M10A Referentiehandleiding - Pagina 6

Blader online of download pdf Referentiehandleiding voor {categorie_naam} GAPOSA M10A. GAPOSA M10A 14 pagina's. Safety brake
Ook voor GAPOSA M10A: Referentiehandleiding (11 pagina's)

Pagina afdrukken

This handbook contains all the data, information and instructions that, in con-

sideration of the importance of the device, must absolutely be taken into consi-

deration by the designer as well as by the installer. Both should have a complete

understanding of the product, its installation and application.

Please read carefully the handbook in all its sections.

• Never remove the protection bag (M3A/M4A/M7A/M10A/M15A/M20A/M30A).

• Never install the safety brake outdoor without protections. Covers, boxes must

protect the safety brake from any contact with external agents such as rain,

industrial detergents, water jets, that could damage the good functioning of the

system.

• Keep these instructions

IMPORTANT INSTRUCTIONS FOR THE SAFETY:

• Do not use if any sign of wear or damage are shown or if any repairing or maintenance

is needed.

• Carefully respect the installation instructions.

• Check frequently the shutter/awning during installation and keep persons far from it

until installation is accomplished.

DESCRIPTION

The safety brake is a safety device for rolling shutters without springs performing two

functions:

1. a bearing support for the shutter shaft;

2. a mechanical brake to stop the descent of the shutter if sudden acceleration occurs.

The GAPOSA safety brake is equipped with a patented shock-absorber system and a

micro-switch to disconnect the electrical supply to the gear motor when the brake locks.