Avantco Equipment 177CHSME24A Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco Equipment 177CHSME24A. Avantco Equipment 177CHSME24A 9 pagina's. Electric cheese melters

Pagina afdrukken

User Manual

Installation

1. Remove unit from box and make sure all plastic, tape and packing materials are removed.

2. Place the unit on a flat, level, and secure surface with at least 12" of open space around all sides.

3. Check to make sure the outlet of the correct voltage for this item is near. Do not use an extension cord, this item must

be plugged directly into an outlet.

a. See optional wall-mounting installation instructions on page 8.

WARNING:

HOT SURFACE! Risk of burns! Please follow the safety instructions below.

• The surface of the device becomes hot during operation. The temperature of the device remains high for some time

after the device has been switched off. Do not grip heating elements or touch any surfaces of the device. Use a

designated handle to operate the device.

• You can transport or clean the device only when it has cooled down completely.

Operation

1. Plug the unit into an outlet of the appropriate voltage.

2. Turn the infinite control dial clockwise and set the desired setting, at this time the orange indicator light will turn ON

to indicate the heating element is ON. Allow your unit to pre-heat.

3. Using the bakelite handles, slide out the rack and either place your food directly onto the rack, use a plate, pan, or

sizzle platter to hold the food. We recommend using a sizzle platter or plate to allow for easy clean up.

4. Using the bakelite handles, lower or raise the rack to the desired height.

a. Use the (4) rack positions for repeatable heating results.

b. Adjusting the height of the rack will affect the intensity of the heat e.g the top rack position will position your

food closer to the heating element, which might result for quicker heating results.

i. Please remember to use the cool-touch bakelite handles when lowering or raising the rack.

5. Use the 15-minute timer to set desired warming time.

a. These are audible timers and do not turn OFF the machine.

6. When the food or plate has finished heating, slide out the rack, and safely remove the food or plate from the rack.

a. There is a rack stop, which should prevent the rack from sliding out completely.

7. When your unit is not in use, we recommend you set it to LOW to maintain residual heat and to reduce pre-heat time

for next use.