Avantco Equipment 177CHSME24IA Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco Equipment 177CHSME24IA. Avantco Equipment 177CHSME24IA 6 pagina's. Electric cheese melters

Pagina afdrukken

Cleaning & Maintenance

NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily.

CAUTION: DO NOT immerse the unit in water or any other liquid, if liquid enters the electrical

compartment it may cause a short circuit or electrical shock.

Before cleaning or attempting to move this item, turn off, unplug and let the unit cool completely.

2. Clean the appliance with a damp cloth using water and soap or detergents, provided that they are not

acidic or abrasive. If the electric salamander is very dirty, use a synthetic scrub sponge.

NOTE: Do not rub the appliance with steel wool pads as they could leave rust stains.

NOTE: We recommend using Noble Chemical's Spiffy Shine metal polish to clean and polish the

outside of your electric salamander. This gentle cleanser is safe to use and doesn't contain any harsh

abrasives.

NOTE: Never use direct water jets to clean the appliance because this could result in water entering

into it and damaging it.

3. Rinse it off with clean water and wipe the entire unit with a clean soft cloth until it is completely dry.

4. The stainless steel drip tray and cooking grate can be removed for easier cleaning.

5. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water

immediately after cleaning. Chemical residue could damage or corrode the surfaces of the unit.

NOTE: To avoid serious injury or damage, never attempt to repair or replace a damaged power

cord yourself.

Troubleshooting

Problem

The power indicator

does not turn on

Heating element turns on but

cooking indicator light is off

The heating elements

do not work

www.AvantcoEquipment.com

User Manual

Possible Causes

Not a good connection to the outlet

or the fuse has blown or the indicator

light is broken

Either the indicator light is malfunctioning

or the circuit connection is loose

Either the heating elements are broken

or the thermostat is malfunctioning

Electric Cheese Melters

Action

Check the outlet connection or fuse box.

If the indicator light is broken, replace

the light.

Replace the indicator light or reconnect

the wiring at the loose point

Replace the heating element or

thermostat