CORNING LSE 6710 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CORNING LSE 6710. CORNING LSE 6710 9 pagina's. Digital vortexer
Ook voor CORNING LSE 6710: Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

6.0 General Precautions

Always plug the unit into a properly grounded and fused outlet.

◗ ◗

Do not use the device near water sources. Take care so that water will not fall on the

◗ ◗

device, especially during cleaning procedures.

Do not use the device in a caustic or explosive atmosphere.

◗ ◗

There are no user serviceable parts in the unit. Opening the unit may void the

◗ ◗

warranty. In case of a malfunction or liquid being spilled into the unit, unplug the

device from its power outlet and contact Corning Customer Service.

NOTE: In the case that the device does not function properly even if you have

exactly followed the instructions described in the User's Manual, contact

Corning Customer Service. If the equipment is used in a manner not specified

by this manual, the equipment may become unsafe to operate, could harm

the user or the device, and may void the warranty.

Do not shake inflammable or explosive samples or use the unit in an inflammable or

explosive environment.

7.0 Troubleshooting Guide

Problem

Solution

POWER key does not light

Check the power source.

Check fuses.

Vortexer stalls – Message Er1

Power the unit down, then restart.

Display does not light

Message Er2 on display

Contact Corning Customer Service.

Message Er3 on display

Message Er4 on display

8.0 Maintenance and Cleaning

With the exception of the occasional maintenance described in section 4.0 of this

◗ ◗

manual, no scheduled maintenance is normally required. However, an experienced

technician should regularly check the device operation at least once a year to make

sure it is operating correctly.

Regular cleaning of the housing is recommended.

◗ ◗

The housing of the Vortexer can be cleaned with special cleaners for polyurethane

◗ ◗

(plastic) surfaces. A damp (not wet) cloth is recommended.

NOTE: Do not use any aggressive or abrasive cleaners (acetone, nitro, polish, etc.)

because its surface can be permanently damaged.

Before cleaning the device, unplug the main cord from the wall socket.

C ORNING LS E MU LTI PU R PO S E D I G I TA L VO RTEXER

9.0 Limited Warranty

Corning Incorporated (Corning) warrants that this product will be free from defects in

material and workmanship for a period of five (5) years from date of purchase. CORNING

DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR

PURPOSE. Corning's sole obligation shall be to repair or replace, at its option, any

product or part thereof that proves defective in material or workmanship within the

warranty period, provided the purchaser notifies Corning of any such defect. Corning

is not liable for any incidental or consequential damages, commercial loss or any other

damages from the use of this product.

This warranty is valid only if the product is used for its intended purpose and within the

guidelines specified in the supplied instruction manual. This warranty does not cover

damage caused by accident, neglect, misuse, improper service, natural forces or other

causes not arising from defects in original material or workmanship. This warranty

does not cover motor brushes, fuses, light bulbs, batteries or damage to paint or finish.

Claims for transit damage should be filed with the transportation carrier.

In the event this product fails within the specified period of time because of a defect

in material or workmanship, contact Corning's Customer Service at the following

numbers: USA: 1.800.492.1110; Canada: 1.978.442.2200. For other regions of the world,

visit www.corning.com/lifesciences or see the included instruction manual for a list of

Worldwide Support Offices.

Corning's Customer Service team will help arrange local service where available or

coordinate a return authorization number and shipping instructions. Products received

without proper authorization will be returned. All items returned for service should be

sent postage prepaid in the original packaging or other suitable carton, padded to avoid

damage. Corning will not be responsible for damage incurred by improper packaging.

Corning may elect for onsite service for larger equipment.

Some states do not allow limitation on the length of implied warranties or the exclusion

or limitation of incidental or consequential damages. This warranty gives you specific

legal rights. You may have other rights which vary from state to state.

No individual may accept for, or on behalf of Corning, any other obligation of liability, or

extend the period of this warranty.

For your reference, make a note of the serial and model number, date of purchase, and

supplier here.

Serial No. ___________________________________

Model No. ________________________________________________________________________________

Supplier __________________________________________________________________________________

Date Purchased ______________________________

Instruction Manual