Makita 3707FC Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 3707FC. Makita 3707FC 16 pagina's. Trimmer
Ook voor Makita 3707FC: Specificaties (2 pagina's), Opsplitsing onderdelen (3 pagina's), Gebruiksaanwijzing (10 pagina's), Gebruiksaanwijzing (13 pagina's)

1. Screws

2. Base protector

3. Screwdriver

10mm(3/8")

1. Straight bit

2. Base

3. Templet

4. Distance (X)

5. Workpiece

6. Templet guide 10

Templet guide

001703

The templet guide provides a sleeve through which the bit passes, allowing

use of the trimmer with templet patterns.

Loosen the screws and remove the base protector. Place the templet guide on

001704

the base and replace the base protector. Then secure the base protector by

tightening the screws.

Secure the templet to the workpiece. Place the tool on the templet and move

001988

the tool with the templet guide sliding along the side of the templet.

NOTE:

•

The workpiece will be cut a slightly different size from the templet. Allow

for the distance (X) between the router bit and the outside of the templet

guide. The distance (X) can be calculated by using the following

equation:

Distance (X) = (outside diameter of the templet guide - router bit diameter) / 2

Straight guide (Accessory)

001706

The straight guide is effectively used for straight cuts when chamfering or

grooving.