Garage Smart AGS001 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Garage Smart AGS001. Garage Smart AGS001 11 pagina's.

Install the Controller Device to the garage

opener

1. STEP 1 : Connect Controller to Opener

Ø Locate the 2 exposed wires coming out of the Controller.

Ø Insert the 2 exposed wires into the terminals on the back of your

Garage Door Opener.

2. STEP 2 : Install the Sensor

Ø The sensor has 2 parts. Both sensor parts must be mounted parallel to

each other, and they must be 3 – 15 mm apart, not touching.

Ø Mount the sensor with wire on the garage frame wall, and mount

the sensor without wire on the top of garage door.