Garage Tek GT1006E Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garage Tek GT1006E. Garage Tek GT1006E 9 pagina's. Tall cabinet, resin - wall mount
Pagina afdrukkenTALL CABINET, RESIN
WALL MOUNT ASSEMBLY INSTRUCTIONS
STEP #3
A. ALINE AND PRESS THE PREVIOUSLY ASSEMBLED (STEP 2C) CENTER SUPPORTS INTO THE BOTTOM PANELS
AS SHOWN. USE A RUBBER MALLET IF NEEDED. ALINE AND PRESS QTY 2, HINGE CENTER SUPPORT (N) INTO
THE BOTTOM DOOR PANELS ORIENTATE THE WORD INSIDE ON THE HINGE CENTER SUPPORT PIECES TO
THE INTERIOR OF THE CABINET.
B. CHECK ALL THE PARTS ARE PROPERLY ENGAGED AND TIGHT.
C. PRESS QTY 4, PANELS (B) INTO THE TOP POSTS OF THE CENTER SUPPORTS. PRESS QTY 2, PANELS (B)
INTO THE TOP POSTS OF THE QTY 2, HINGE SUPPORTS AS SHOWN.
D. PRESS QTY 2, HINGE CENTER SUPPORTS (N) INTO THE TOPS OF THE QTY 2, DOOR PANELS ASSEMBLED IN
STEP ABOVE.
E. ALINE AND PRESS QTY 1, BASE / TOP (A) INTO THE TOP PANELS AND FINALLY PRESS QTY 4, CAPS (D) INTO
THE TOP.
PG 3
QUESTIONS ???? CALL 1-866 664 2724
REV 1, 10/11