Makita 4303C Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 4303C. Makita 4303C 16 pagina's. Electronic jig saw

Straight line or orbital cutting action

Conventional jig saws cut with

straight

line action, that is, the blade moves only

up and down in a straight line. Your saw

also cuts in this manner but, for softer

workpieces, an orbital cutting action can

be selected. Soft workpieces like wood and

plastic permit deep penetration of indivi-

dual saw teeth. The orbital action thrusts

the blade forward on the cutting stroke

and greatly increases cutting speed over

conventional jig saws. Harder workpieces

like metal should be cut using the straight

line cutting action or

very low orbital

setting. To select straight line or orbital

cutting, adjust the number on the saw.

Lever

Position

- For cutting in mild steel, stainless steel and plastics.

For clean cuts in wood and plywood.

Position

- For cutting in mild steel, aluminum and hard wood.

Position

For cutting in wood and plywood.

For fast cutting in aluminum and mild steel.

Position

I11

For fast cutting in wood and plywood.

Switch action

To start the tool, simply pull the trigger.

Release the trigger to stop. For continuous

operation, pull the trigger and then push in

the lock button. To stop the tool from the

locked position, pull the trigger fully, then

release it.

Lock button

Switch

triqqer

CAUTION :

Before plugging in the tool, always check to see that the switch trigger actuates properly

and returns to the "OFF" position released.