Makita 4304 Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 4304. Makita 4304 20 pagina's. Variable speed
Ook voor Makita 4304: Gebruikershandleiding (8 pagina's)
Pagina afdrukken
Speed adjusting dial
The tool speed can be adjusted and maintained between 500 and
3,000 strokes per
minute by turning the adjusting dial. The dial
is
marked 1 (lowest speed) to 6 (full speed).
Workpiece to be cut
1
-
Lock
lever
:or
4304
Number on adjusting dial
Refer to the table
a t
right to select the
proper speed for the workpiece to be cut.
However, the appropriate speed may differ
with the type or thickness of the work-
piece. In general, higher speeds will allow
you to cut workpieces faster but the
service life of the blade will be reduced.
Wood
-
Speed adjusting dial
For
4305
5 - 6
Mild steel
3 - 6
Stainless steel
3 - 4
CAUTION:
Adjust the speed adjusting dial only within the range of numbers 1 through 6. Do not
force the dial beyond this range or damage to the tool may result.
Aluminum
Cutting operation
CAUTION :
Check carefully that the blade i s adequately secured in position before plugging the tool
into electrical source.
Turn the tool on without the blade making any contact. Rest the base flat on the work-
piece and gently move the tool forward along the previously marked cutting line.
2 - 3
For
4304
I
Plastics
C u t t i n g line
I
1 - 4
I
: C u
t t
i n
g
line
9