CORNING PC-400D Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CORNING PC-400D. CORNING PC-400D 14 pagina's. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Ook voor CORNING PC-400D: Gebruiksaanwijzing (11 pagina's), Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (14 pagina's)

Pagina afdrukken

4.0 Product Connections

1. Power Cord Input: Connect the supplied power cord into this connector.

2. External Temperature Controller Input: Connect the optional External Temperature

Controller (Cat. No. 6795PR) into this connector.

To Connect/Disconnect the External Temperature Controller

1. Turn the Stir Control Knob and Heat Control Knob to the OFF position.

2. Disconnect power cord.

3. Insert/remove external temperature controller connector into/from the input connector.

4. Reconnect power cord.

5. Product is now ready for use.

5.0 Stirring Instructions

For Models: PC-410D, PC-420D, PC-610D, PC-620D

1. Fill the vessel with solution to be stirred.

2. Place the stir bar into the vessel.

3. Place the vessel in the center of the top surface.

4. Turn Stir Control Knob until the Stirring Speed Display shows the desired speed. The speed

setting can be adjusted according to the table below.

Operating Range (rpm)

60 - 100

100 - 200

200 - 400

400 - 1,150

Flashing Display: The number will FLASH when the actual stirring speed is not at set speed.

Constant Display: The number will not flash when the actual stirring speed is at the set

speed. The number will remain constantly ON when the actual stirring speed is at the

set speed.

Adjustable Increment (rpm)

Instruction Manual