FRIGOGLASS Flex 35 HC Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} FRIGOGLASS Flex 35 HC. FRIGOGLASS Flex 35 HC 13 pagina's.

Pagina afdrukken

If the ICM is not functioning properly or is out of order, please check the following before calling the

authorized service provider:

FAULT

The ICM does not

work.

The cooler does not

cool.

Models Flex 35 HC, Flex 45 HC and Flex 60 HC are equipped with

HC refrigerant. All service operations on cooling mechanism &

gas charging should be performed in a well ventilated

environment or in open air. Do not smoke during maintenance.



UNPLUG THE COOLER PRIOR TO ANY MAINTENANCE OR SERVICE

OPERATIONS. REMOVE THE PLUG AND MAKE SURE THAT THE

OPERATOR CAN CHECK FROM ANY OF THE POINTS WHICH HE

HAS ACCESS THAT THE CABLE IS UNPLUGGED.



After maintenance operations, make sure that the grounding

connections are in place before assembling the covers. Make sure

you use the same fastening components and covers.



If any electrical components need to be replaced, use only the

identical components in the spare part list supplied by the technical

service department of Frigoglass.



Keep the glass door of the cooler closed during cooling mechanism

maintenance. The appliance will not stand stable when the

compressor is disassembled. If the compressor needs to be

replaced, use adequate support to stabilize the cooler.



After maintenance operations make sure that the strain relief, which

supports the supply cord, is assembled properly.

POSSIBLE REASONS

Power cord not plugged in.

No power supply at the socket.

The ICM has recently been reloaded

with warm products. Please note

that it takes some time to cool warm

products.

The ICM is loaded in such a way

that the air circulation in the interior

is getting blocked.

The door does not seal properly.

Leakage in the cooling system.

HANDLING

Plug it in.

Check the outlet fuse.

Preferably, reload the ICM before night

closing.

Load the ICM according to the

standards you have been provided

with by the company.

Repair the doors for proper closing

(this type of repair should be

performed by an authorized

technician).

Repair the leakage (this type of repair

should be performed by an authorized

technician).

ENG