Bernina Quilting Frame Montagehandleiding - Pagina 8

Blader online of download pdf Montagehandleiding voor {categorie_naam} Bernina Quilting Frame. Bernina Quilting Frame 16 pagina's.

6-2: Thread (2) M5 X 8mm SBHCS into the first two holes on the Track Runner to tighten the

coupler in place, as shown in Fig. 6-1.

6-3: Slide another Track Runner onto the other side of the coupler, making the top surface of the

Track Runners as flush as possible. Thread in (2) M5 X 8mm SBHCS into the inside holes as shown

in Fig. 6-1.

6-4: Repeat this process for the other Track Runner

assembly.

6-5: Place a Track Runner Assembly on the Front

Track Support, line up the holes on Track Support with

the holes on the Track Runners.

6-6: Thread (10) M5 X 15mm SBHCS down through

the Track Runner and Track Support but don't tighten

the SBHCS until the Step Placing Your Sewing Machine.

6-7: Repeat Steps 6-5 through 6-6

for the back Track Runner.

Step 7: Track Installation

Parts Needed:

4- 120" Track (King setup only)

4- 60" Track (Crib setup only)

7-1: Slide two pieces of Track into the Front Track

Support, as shown in Fig. 7-1.

7-2: Slide two pieces of the Track into the Back

Track Support.

Step 8: Frame End Assembly

Parts Needed:

1- Right Side Leg Brace

1- Left Side Leg Brace

1- Right Frame End

1- Left Frame End

6- M6 x 10mm SBHCS

4- M6 x 45mm SBHCS

Tools Required:

4mm Allen Wrench (Provided)

8-1: Attach the Left Side Leg Brace to the Side Leg with (2) M6 x 10mm SBHCS, as shown in Fig.

8-1, making sure the Bernina Logo faces out.

Table Surface

Fig. 6-2

Track Runner

Fig. 7-1

M5 X 15mm

SBHCS

Track

Pg.8