CORNING 1LAN-QSFPP-40GB-LR Snelle installatiehandleiding - Pagina 9
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} CORNING 1LAN-QSFPP-40GB-LR. CORNING 1LAN-QSFPP-40GB-LR 13 pagina's. Head end equipment
Pagina afdrukken
ONE SD-LAN Head
End Equipment
Quick Installation Guide
SD-LAN-000-HEEQUIP
5 Active Ethernet Set Up |
NOTES:
• If Active Ethernet topology is being utilized, the SDDP
TOR switch can be used to directly feed Access
Nodes if empty ports are available on the TOR.
• If empty ports are not available an SDDP Aggregation
Switch can be uplinked to the SDDP TOR switch
Following are steps for connecting both methods
RD
3
Virtual App Host / Se rver
p/n:
1LAN-D600E05-BL
Power Supply Unit
p/n:
024401G2131006F
LC/UPC to SC/APC
Qucik Installation I SD-LAN-000-HEEQUIP
Examples:
IPTV
WIFI
SECURITY
IP PHONE
BMS
Etc.
p/n:
1LAN-SRV-50195L
p/n:
1LAN-SDDP-48P
SFPs:
1LAN-SFP-4305BC
Bi-Di SFP, 1 Gb
to ONT
1LAN-QSFPP-40GB-LR
40Gb SFP
1LAN-SFPP-10GB-LR
10Gb SFP
1LAN-SFP-1GB-LXLH
1Gb SFP
1LAN-SFP-1GCU
Cu SFP
1LAN-OA-UPC
p/n:
PSU6-1U
Power M odule:
PSM-I
Patch Panel
AB
CD
EF
GH
IJ
KL
Patch Pane l
5.1 Active Ethernet Connections using SDDP
TOR
Step 1
Insert a Bi-Di Fiber SFP (1LAN-SFP-
4305BC) into an open port on the
SDDP TOR switch
Step 2
Connect a 10dB attenuator into SFP
Step 3
Connect an LC/UPC connector
jumper into the Attenuator
1LAN-SFP-4305BC
Step 4
Plug the other end into fiber patch
panel that connects the fiber link to
an Access Node
NOTE: The other end of the fiber jumper may be
another connector type other than LC/UPC depending
on patch panel. However, the connector connecting to
the SFP must be LC/UPC
| Page 9