Avantco Equipment 449SF5 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco Equipment 449SF5. Avantco Equipment 449SF5 9 pagina's. Blast chiller/freezer

Pagina afdrukken
User Manual
Quick Start Guide
Getting Started
1. To get started, press the Power Button (1)
precool for 20 minutes before starting the cooling process.
Manual Set
1. Under the precooling mode, press the Set Button (2)
and time settings. When the field is flashing, press the (4)
temperature settings.
2. After setting the desired time and temperature, press the Start/Stop Button (3)
cooling cycle.
3. During the cooling process, pressing and holding the Set Button (2)
and temperature setting.
4. The Start/Stop Button (3)
cooling. NOTE: After the cooling cycle is stopped, restart should not be attempted for 2 minutes.
If restart is attempted within 2 minutes, there will be a delayed start of 2 minutes until the
compressor starts.
Quick Chill
1. Pressing this button is a shortcut alternative to manual setting the unit for 38°F and time to 1 hour
and 30 minutes.
2. Under the precooling mode, press the Quick Chill Shortcut Button (6)
3. Then, simply press the Start/Stop Button (3)
4
4
2
can be pressed at any time to stop the cooling cycle during
11
5
6
12
10
9
3
1
to enter the precooling mode. Allow the unit to
to switch between the temperature
or
to change the time and
to initiate the cooling cycle.
- 6 -
7
8
to initiate the
will show the current time
.