Avantco Equipment 177C15 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantco Equipment 177C15. Avantco Equipment 177C15 5 pagina's. Thermo pump system coffee brewers
Specifications
Model: 177C10, 177C15,
Electrical: 120V, 50-60Hz; 1650W(C10), 1450W(C15),
Water Capacity: 2.2 liters
Read and understand all instructions before using
!
the appliance. CAUTION! HOT SURFACE!
Warnings
• This appliance is designed for commercial use only.
• This appliance must be placed on a level surface able to adequately support its weight.
• Users should not leave the appliance unattended while it is in operation.
• Never immerse the appliance in water.
• Never pour hot water, coffee, or coffee powder into the water reservoir.
• Do not overfill the water reservoir.
• Do not unplug the appliance if your hands are wet.
• Do not unplug the appliance by pulling the cord.
• Do not attempt to repair or replace the power cord if it becomes damaged. Contact a qualified service agent.
• While the appliance is in use, some parts will become very hot. Ensure that the cord does not come in contact with
any hot parts.
• Be careful not to touch any hot surfaces.
• Do not allow empty decanters to sit on the hot plate.
Installation
Carefully unpack the coffee brewer and inspect for
damage and missing parts.
1. Position the brewer on a sturdy, level surface. Allow enough room above it for safe and easy filling of the water reservoir.
2. Place an empty glass decanter or airpot under the funnel.
3. Fill the brewer's reservoir with water (approximately 75 ounces).
4. Turn the power switch to "ON". The Readiness Indicator should light. After approximately 2 minutes, the machine will
begin brewing.
5. After 4-5 minutes, the Readiness Indicator should turn off, indicating that the brewing process has ended.
6. Repeat steps 2 through 5 twice to clean the machine's internal parts before brewing coffee for the first time.
NOTE: It is normal to hear some brewing and pumping sounds and to see water vapor coming out of
the machine during this procedure.
In case of overflow, turn the power switch
!
"OFF" immediately to stop the process.
www.AvantcoEquipment.com
User Manual
3