Makita 4350CT Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 4350CT. Makita 4350CT 13 pagina's. Jig saw
Ook voor Makita 4350CT: Specificaties (2 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Technische informatie (14 pagina's)

Pagina afdrukken

FUNCTIONAL

DESCRIPTION

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before adjusting or checking function

on the tool.

Selecting the cutting action

► 1 . Cutting action changing lever

This tool can be operated with an orbital or a straight

line (up and down) cutting action. The orbital cutting

action thrusts the blade forward on the cutting stroke

and greatly increases cutting speed.

To change the cutting action, just turn the cutting action

changing lever to the desired cutting action position.

Refer to the table to select the appropriate cutting

action.

Position

Cutting action

Straight line

cutting action

Small orbit

cutting action

Medium orbit

cutting action

Large orbit

cutting action

Applications

For cutting mild steel,

stainless steel and plastics.

For clean cuts in wood

and plywood.

For cutting mild steel,

aluminum and hard wood.

For cutting wood and

plywood.

For fast cutting in

aluminum and mild steel.

For fast cutting in

wood and plywood.

Switch action

► 1 . Switch trigger 2. Lock button

CAUTION:

•

Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and

then push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Speed adjusting dial

For 4350CT, 4350FCT

► 1 . Speed adjusting dial

The tool speed can be infinitely adjusted between 800

and 2,800 strokes per minute by turning the adjusting

dial. Higher speed is obtained when the dial is turned in

the direction of number 5; lower speed is obtained when

it is turned in the direction of number 1.

Refer to the table to select the proper speed for the

workpiece to be cut. However, the appropriate speed

may differ with the type or thickness of the workpiece. In

general, higher speeds will allow you to cut workpieces

faster but the service life of the blade will be reduced.

5 ENGLISH