Makita 5091DWH Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 5091DWH. Makita 5091DWH 18 pagina's. 85 mm (3-3/8")
Ook voor Makita 5091DWH: Onderdelenlijst (2 pagina's)

Pagina afdrukken

Sighting

The front of the base i s notched to provide

two guide edges.

For straight cuts, align the edge with

0 '

engraved on

with your cutting line on

the workpiece.

For 45' bevel cuts, align the edge with 45'

engraved on it with your cutting line.

For

straight cuts

'For

450

bevel

Cutting

line

Fig.

1 1

Switch action

To prevent the trigger from being acciden-

tally pulled, a lock-off lever i s provided.

To start the tool, slide the lock-off lever

in the direction of the arrow and pull the

trigger. Release the trigger to stop.

Lock-off lever

Fig.

CAUTION :

Before inserting the battery cartridge into the tool, always check t o see that the switch

trigger actuates properly and returns t o the "OFF" position when released.

Operation

Hold the tool firmly. Set the base plate on

the workpiece to be cut without the blade

making any contact. Then turn the tool on

and wait until the blade attains full speed.

Now simply move the tool forward over

the workpiece surface, keeping it flat and

advancing smoothly until the sawing is

completed. To get clean cuts, keep your

sawing line straight and your speed of

advance uniform.

Base

Fig.

CAUTION:

Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the

tool will result in overheating of the motor and dangerous kickback, possibly causing

severe injury.

If the tool

operated continuously until the battery cartridge has discharged, allow the

tool to rest for

minutes before proceeding with a fresh battery.