Makita 5093DZ Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 5093DZ. Makita 5093DZ 20 pagina's. 85 mm (3-3/8”)

not use dull or damaged blade. Unsharpened or improperly set blades

produce narrow kerf causing excessive friction, blade binding and KICKBACK.

Blade depth and bevel adjusting locking levers must be tight and secure before

making cut. If blade adjustment shifts while cutting,

may cause binding and

KICKBACK.

Use extra caution when making a "Pocket Cut" into existing walls or other

blind areas. The protruding blade may cut objects that can cause KICKBACK.

NEVER place your hand or fingers

behind the saw. If kickback occurs,

the saw could easily jump backwards

over your hand, possibly causing

severe injury.

Fig.

12. Adjustments. Before cutting be sure depth and bevel adjustments are tight.

13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before

cutting.

14.

When operating the saw, keep the

cord away from the cutting area and

position

so that

will not be caught

on the workpiece during the cutting

operation.

Operate w i t h proper hand support,

proper workpiece support,

and

supply cord routing away from the

work area.

WARN

I NG

typical illustration of proper hand

support, workpiece support, and

supply cord routing.

Fig.

It is important t o support the workpiece properly and to hold the saw firmly

t o prevent loss of control which could cause personal injury. Fig. 4 illustrates

typical hand support of the saw.