JAMEC PEM PRO Series Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} JAMEC PEM PRO Series. JAMEC PEM PRO Series 4 pagina's. Air hose reel
Ook voor JAMEC PEM PRO Series: Gebruiksaanwijzing (3 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (2 pagina's), Gebruiksaanwijzing (3 pagina's)
![JAMEC PEM PRO Series Gebruiksaanwijzing](/uploads/products/server2/2094604/2094604.jpg)
AIR HOSE REEL
PRO SERIES - CONTROLLED
RETURN
Extreme Ultraflex Reinforced Hose is a special blend of hose that has been
developed for today's demanding conditions, it stay flexible in the cold and
doesn't kink in the heat, allowing full flow in all-weather conditions.
It's a tough hose for tough conditions
FEATURES
Hose layering system
■
Auto lock / auto rewind
■
Solid brass internal spindle
■
No tools required adjustable hose stop
■
Wall mount with 180° pivot
■
Weather resistant UV stabilised polypropylene case
■
Leader hose 2 m with brass fittings
■
Includes Jamec Pem Extreme Ultraflex Hose
■
SPECIFICATIONS
Part no.
58.5089 (58.5089NA)
Hose length
20 m (65 FT)
Hose I.D
9.2 mm (3/8")
Hose O.D
15.2 mm (5/8")
2 m (6.5') with 1/4" BSP Male
Leader hose length
fitting (1/4")
Extreme Ultraflex Reinforced
Hose material
Hose
Controlled return /
Reel / case type
polypropylene
Auto lock / rewind
Yes
Max. working
300 psi
pressure
Fitting size
1/4" BSP Male (1/4")
Bracket
180° Pivoting
Weight - kg
8.6
Product dimensions
569 L x 246.4 W x 441.6 D mm 569 L x 246.4 W x 441.6 D mm
Advised application
Air
SPECIFICATIONS
Part no.
58.5034
Hose length
20 m
Hose I.D
9.5 mm (3/8")
Hose O.D
16 mm (5/8")
Leader hose length
2 m with 1/4" BSP Male fitting
Hose material
Reinforced PVC braided
Controlled return /
Reel / case type
polypropylene
Auto lock / rewind
Yes
Max. working
300 psi
pressure
Fitting size
1/4" BSP Male
Bracket
180° Pivoting
Weight - kg
8.8
Product dimensions
569 L x 246.4 W x 441.6 D mm 569 L x 246.4 W x 441.6 D mm
Advised application
Air
58.5056
15 m
12.5 mm (1/2")
18.5 mm (3/4")
2 m with 3/8" BSP Male fitting
Reinforced PVC braided
INSTALLATION
Controlled return /
The Jamec Pem Air Hose Reel Pro Series Controlled Return
polypropylene
can be mounted in a horizontal or vertical position.
Yes
1.
300 psi
2.
3/8" BSP Male
180° Pivoting
3.
8.6
Air (high volume)
4.
Note: It is recommended to install the mounting bracket 0.8
metre (minimum) above
the floor level.
58.5012
5.
32 m
8 mm (5/16")
6.
12 mm 1/2")
2 m with 1/4" BSP Male fitting
Note: For fixed in-line position, fit the locking plate onto the
Reinforced PU braided
Mounting Bracket prior to inserting the pivot pin. (Fig. 3)
Controlled return /
polypropylene
7.
Yes
Note: Apply thread sealing tape to all air line and air hose
fittings.
250 psi
1/4" BSP Male
180° Pivoting
9.7
Air (long reach)
5
2
4
1
6
3
0.8 METRE MIN.
Chose a location that is near to the compressed air source.
For large areas, place the hose reel at the centre of the
work area.
When mounting the hose reel vertically, ensure there is
adequate clearance under the reel to prevent injury or
damage.
Mounting bracket must be installed on a flat surface.
Drill 4 x M8 holes to match the holes located in the
Mounting Bracket. (Fig. 1)
Connect the hose reel to the Mounting Bracket with the
Pivot Pin. (Fig. 2)
Connect the inlet leader hose to the compressed air source.
PRODUCT
IDENTIFICATION
8
Mounting Bracket
1.
Optional Fixed In-line
2.
Locking Plate
Pivot Pin
3.
Fully Enclosed Case
4.
Carry Handle
5.
Solid Brass Internal
6.
Spindle
2 metre Leader Hose
7.
7
Hose with Adjustable
8.
Stopper
Fig. 1 Mounting Bracket
Fig. 2 Pivot Pin
Fig. 3 Locking Plate