Makita 5705R Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 5705R. Makita 5705R 13 pagina's. 165/190/235 mm
Ook voor Makita 5705R: Handmatig (15 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (16 pagina's), Technische informatie (5 pagina's)

Pagina afdrukken

13. Always use the saw blade intended for cutting

the material that you are going to cut.

14. Only use the saw blades that are marked with

a speed equal or higher than the speed marked

on the tool.

15. (For European countries only)

Always use the blade which conforms to EN847-1.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before adjusting or checking function

on the tool.

Adjusting depth of cut

► 1 . Lever

CAUTION:

•

After adjusting the depth of cut, always tighten

the lever securely.

Loosen the lever on the depth guide and move the base

up or down. At the desired depth of cut, secure the base

by tightening the lever.

For cleaner, safer cuts, set cut depth so that no more

than one blade tooth projects below workpiece. Using

proper cut depth helps to reduce potential for danger-

ous KICKBACKS which can cause personal injury.

Bevel cutting

► 1 . Clamping screw

For model 5705R, 5903R, 5103R

Loosen the clamping screws in front and back, and tilt

the tool to the desired angle for bevel cuts (0° - 45°).

Secure the clamping screws tightly in front and back

after making the adjustment.

For model 5143R

Loosen the clamping screw in front and tilt the tool

to the desired angle for bevel cuts (0 - 60°). Secure

the clamping screw tightly in front after making the

adjustment.

Sighting

For 5705R

► 1 . Base plate

7 ENGLISH