JAMEC PEM 10.3012OS Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} JAMEC PEM 10.3012OS. JAMEC PEM 10.3012OS 4 pagina's.

Pagina afdrukken

TYRE INFLATOR

DIGITAL TDR3000

The Jamec Pem TDR Digital Tyre Inflator represent quality and guaranteed

accuracy. The classic handheld, slimline design is easy to hold and is

designed to last in rugged workshop environments.

FEATURES

Includes Certificate of calibration

Multi-scale gauge

Large backlit digital display

Accuracy exceeds EC Standards

Auto on upon pressure sensing

Auto off after 9 seconds

Tough die-cast aluminium housing

Wire sheathed hose eliminates kinking

Impact absorbing bumpers

Rubber grip on chuck

SPECIFICATIONS

Part No.

Operation

Supply pressure max.

Max. inflation

Chuck type

Chuck style

Scale

Inlet size

Hose length

Accuracy

Inflation volume L/min

Power source

Battery life (continuous use)

Auto off

Weight

Advised application

Packaging

SPECIFICATIONS

Part No.

Operation

Supply pressure max.

Max. inflation

Chuck type

Chuck style

Scale

Inlet size

Hose length

Accuracy

Inflation volume L/min

Power source

Battery life (continuous use)

Auto off

Weight

Advised application

Packaging

10.3012

10.3012OS

Inflate / deflate / measure

200 psi

174 psi

Hold on

Dual angle

psi, kPa, bar

1/4" BSP

500mm

± 2 psi @ 25 - 75 psi

500 L/min @ 188 psi

2 x AAA (included)

80 hr

9 sec

.85 kg

Industrial, workshops

Jamec Pem Box

10.3012OS2

10.3012OS3

Inflate / deflate / measure

200 psi

174 psi

Clip on

Dual angle

Single straight

psi, kPa, bar

1/4" BSP

2700 mm

1800 mm

± 2 psi @ 25 - 75 psi

500 L/min @ 188 psi

2 x AAA (included)

80 hr

9 sec

.85 kg

Industrial, workshops

Jamec Pem Box

MAINTENANCE MONTHLY

Remove the 'oil' screw on the side of the gauge and place 2-3 drops of

'light' oil into the gauge mechanism.

IMPORTANT

This tyre inflator must only be connected to air line systems which have

clean dry air. Any moisture in the air line system may cause damage to

the operation of this tyre inflator and void warranty.

Air pre-filters must be used with this inflator to ensure product accuracy

and longevity.

OPERATION

TO READ PRESSURE:

Remove tyre valve cap. With clip-on air chuck lever depressed, firmly press

chuck onto tyre valve stem and release lever, ensure that no air leaks.

Check pressure gauge.

Digital - the digital display will activate once the tyre pressure is sensed.

If no pressure is sensed the display will not turn on. Press the tyre inflator

lever to add air into the tyre, before reading the pressure.

DIGITAL - the dial gauge will activate once the tyre pressure is sensed. If

no pressure is sensed ,press the tyre inflator lever to add air into the tyre,

before reading the pressure.

TO INFLATE:

With clip-on air chuck lever depressed, firmly press chuck onto tyre

valve stem and release lever, ensure that no air leaks. Fully depress the

tyre inflator lever for an appropriate period of time and release the lever.

Check pressure gauge and repeat the procedure until correct pressure level

is achieved.

TO DEFLATE:

With clip-on air chuck lever depressed, firmly press chuck onto tyre valve

stem and release lever, ensure that no air leaks. Depress the tyre inflator

lever half way (until air can be heard to be escaping) for an appropriate

period of time and release the lever. Check pressure gauge and repeat the

procedure until correct pressure level is achieved.

SAFETY

Never exceed the maximum pressure of the tyre. Check that the hose and

chuck are in good condition with no damage or cracks. Ensure safe working

environment when using compressed air. Return to authorised service agent

for repair and maintenance.

WARNING

To avoid risk of personal injury, especially to the eyes, face and skin

DO NOT direct the air stream at any person, or any part of the body.

This equipment is not intended for use by children without adult

supervision. The manufacturer reserves the right to change product

features at any time without notice.