JAMEC PEM 11.0578 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} JAMEC PEM 11.0578. JAMEC PEM 11.0578 5 pagina's. Tyre inflator digital automatic
TYRE INFLATOR
DIGITAL AUTOMATIC
The Jamec Pem Digital Automatic Tyre Inflator represent quality and
guaranteed accuracy. The classic handheld, slimline design is easy to hold
and is designed to last in rugged workshop environments, utilised in a
majority of Australian service stations.
FEATURES
Includes Certificate of calibration
Two programmable pre-set buttons
Multi-scale gauge
Large LCD backlit digital display
Accuracy exceeds EC Standards
Auto on upon pressure sensing
OPS (Over Pressure Setting) function that allows the tyre to be inflated
to a certain pressure then deflates automatically to a normal operating
pressure,
used for seating tyres on rims
Tough metal housing
Includes NITTO equivalent adaptor
SPECIFICATIONS
Operation
Supply pressure max.
Max. inflation
Chuck type
Chuck style
Scale
Inlet size
Hose length
Accuracy
Inflation volume L/min
IP rating
Weight
Advised application
MAINTENANCE
DAILY MAINTENANCE
The device does not require a particular maintenance routine but a check of
the pneumatic connections is suggested frequently to make sure of correct
air supply, the use of an air pre-filter is mandatory for this unit to operate
properly.
SPECIAL MAINTENANCE
This is a sensitive piece of equipment if you have an error that cannot easily
be fixed please contact an authorised service agent.
NOTE: All faulty PCBs that are within the warranty period are to be returned
to factory for assessment and repairs. PCBs that are found to be burnt due to
water damage will not be covered under any warranty.
IMPORTANT
This tyre inflator must only be connected to air line systems which have
clean dry air. Any moisture in the air line system may cause damage to
the operation of this tyre inflator and void warranty.
Air pre-filters must be used with this inflator to ensure product accuracy
and longevity.
Auto inflate / deflate / measure
182 psi
174 psi
Clip on
Single straight
psi, kPa, bar
1/8" BSP
10m
± 2 psi @ 25 - 75 psi
2500 L/min @ 182 psi
240V AC
2.3 kg
Industrial, workshops
COMPONENTS LIST
PLEASE CHECK AND MAKE SURE THAT THE FOLLOWING COMPONENTS
ARE COMPLETE IN THE PACKAGE.
Automatic Tyre Inflator with power cord
7.6 m (25 ') Air Hose
Hook and M6 x 38 screw kit (1pc)
User manual
M6 x 38 screw 4pcs for wall mounting
INSTALLATION
1. Unpack the unit.
2. Hold the unit up on the wall and mark where the four (4) holes are
to be drilled.
3. Secure the unit using suitable fastener.
4. Connect the air supply to the unit.
5. Connect the rubber hose as air outlet
6. Connect the power supply.
WARNING
To avoid risk of personal injury, especially to the eyes, face and skin
DO NOT direct the air stream at any person, or any part of the body.
This equipment is not intended for use by children without adult
supervision. The manufacturer reserves the right to change product
features at any time with out notice. When using the OPS function,
the sum pressure must not exceed the tyre manufacturer's maximum
inflation pressure.
This unit is connected directly to compressed air and this air contains oil
and water. Water is from condensation and oil is from the compressor.
Water and oil will destroy this device, so it is important to filter them out
first from the system, this means you must attach a filter prior to this
devices air connection.
YOU MUST USE AN AIR PRE-FILTER WITH THIS INFLATOR OTHERWISE
WARRANTY WILL BE VOIDED
Electrical connections should be carried out by a qualified person strictly
according to the related regulation applicable at the location where the
inflator is used.
To avoid equipment damage, never exceed the maximum inlet pressure
of 182 psi
To avoid the risk of personal injury, especially to the eyes, face or skin,
DO NOT direct the air stream at any person.
This equipment is not intended for use by children without adult
supervision.
When using the OPS function, the sum pressure must not exceed the tyre
manufacturers maximum inflation pressure.
GENERAL NOTES
During extended inactivity, please package the inflator and keep it away
from damp, heat or impact, etc.
After unpacking the inflator, the packing materials should be disposed
of according to the laws and regulations applicable to the country being
used.
Please check carefully to ensure that no part is damaged, so to ensure
safe and normal operation.
The Automatic Tyre Inflator can be installed outside, but a shelter is
suggested, so to protect the equipment from the weather and extend the
service life.