Makita 6825R Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6825R. Makita 6825R 8 pagina's. Drywall screwdriver
Ook voor Makita 6825R: Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (7 pagina's), Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken
Makita 6825R Gebruiksaanwijzing
ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Model
Self drilling screw
Drywall screw
-1
)
equipment
environmentally
compatible
) : 82 dB(A)
pA
) : 93 dB(A)
WA
6823
6 mm
6 mm
0 - 2,500
301 mm
1.6 kg
END201-5
Vibration
The
vibration
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
and
its
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENE033-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENF002-1
is running idle in addition to the trigger time).
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
ENG102-2
Designation of Machine: Drywall Screwdriver
Model No./ Type: 6823,6824,6825,6825R
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
2
6824
6825
6 mm
-
5 mm
4 mm
0 - 4,500
0 - 6,000
290 mm
290 mm
1.5 kg
1.5 kg
/II
total
value
(tri-axial
) : 2.5 m/s
h
2
Corporation
as
6825R
-
4 mm
0 - 6,000
290 mm
1.5 kg
ENG204-2
vector
sum)
2
or less
ENG901-1
ENH101-12
the
responsible