Makita 6906 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6906. Makita 6906 8 pagina's. Makita 6906 impact wrench: specifications
Ook voor Makita 6906: Gebruiksaanwijzing (13 pagina's), Opsplitsing onderdelen (3 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (7 pagina's), Gebruiksaanwijzing (8 pagina's)
Pagina afdrukken
ENGLISH (Original instructions)
SPECIFICATIONS
Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for fastening bolts and nuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Overall length
Net weight
Safety class
equipment
and
6905B
M12 - M20
M12 - M16
12.7 mm
1,700
2,000
294 N.m
270 mm
2.8 kg
END201-5
Model 6905B
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model 6906
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
its
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 6905B
Work mode : impact tightening of fasteners of the
ENE036-1
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENF002-2
Model 6906
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
ENG905-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
2
/II
) : 93 dB(A)
pA
) : 104 dB(A)
WA
) : 98 dB(A)
pA
) : 109 dB(A)
WA
Wear ear protection
) : 16.5 m/s
h
2
) : 16.5 m/s
h
2
6906
M16 - M22
M16 - M20
19 mm
1,700
1,600
588 N.m
327 mm
5.6 kg
/II
ENG900-1
2
2
ENG901-1