Makita 691lHDWG Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 691lHDWG. Makita 691lHDWG 16 pagina's. Cordless impact wrench
Pagina afdrukken
* T o remove the battery cartridge, pull out
the set plate on the tool and grasp both
sides of the cartridge while withdrawing
it from the tool.
*To
insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip
it
into
place. Snap the set plate back into place.
Be sure to close the set plate fully before
using the tool to prevent the battery
cartridge from accidentally falling out of
the tool.
*Do
not use force when inserting the battery cartridge. If the cartridge does not slide in
easily, it is not being inserted correctly.
Set 'late
B a t t e r y cartridge
Charging
Your new battery cartridge i s not charged.
You will need to charge it before use. Use
the fast charger Model
DC1201
to charge
the battery cartridge.
*Plug the fast charger into the proper A/C
voltage source. The charging light will
flash in green color.
*Insert the battery cartridge
so
that the
plus and minus terminals on the battery
cartridge are on the same sides as their
respective markings on the fast charger.
Insert the cartridge fully into the port so that it rests on the charger port floor.
*When the battery cartridge is inserted, the charging light color will charge from green to
red and charging will begin. The charging light will remian lit steadily during charging.
*When charging is completed, the charging light color will change from red t o green and
a tone will sound steadily for about
5 seconds. The charging time is approximately one
hour.
*After charging, unplug the charger from the power source.
7