Makita 6924N Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6924N. Makita 6924N 8 pagina's. Shear wrench
Ook voor Makita 6924N: Gebruiksaanwijzing (8 pagina's), Gebruiksaanwijzing (20 pagina's)

Pagina afdrukken

Use care and common sense when disposing

of sheared bolt tips. Falling tips from high loca-

tions or scattered tips can cause severe injury.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or famil-

iarity with product (gained from repeated

use) replace strict adherence to shear

wrench safety rules for the subject product.

MISUSE or failure to follow the safety rules

stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before adjusting or checking function

on the tool.

Switch action

► 1 . Switch trigger

CAUTION:

•

Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Removing the outer and inner sleeves

► 1 . Outer sleeve 2. Screw

CAUTION:

•

Be careful not to allow foreign matter to enter

the insides of the tool when removing or install-

ing the outer and inner sleeves.

The outer sleeve M24 and inner sleeve M24 are factory - installed. If

you need other sizes for your work, replace the sleeves as follows.

Loosen the two screws while holding the outer sleeve.

The outer and inner sleeves will be pushed up by the

springs built into the tool.

Press the pin down to remove the inner sleeve from the

outer sleeve. Be careful not to drop the inner sleeve

when removing it. Do not remove the inner sleeve

spring, tip rod and tip rod spring from the tool.

► 1 . Inner sleeve 2. Pin 3. Outer sleeve

► 1 . Tip rod 2. Tip rod spring 3. Inner sleeve spring

4 ENGLISH