Avantgarde DUO GT Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avantgarde DUO GT. Avantgarde DUO GT 19 pagina's.

SAFETY INFORMATION

CAUTION

To prevent fire, shock or damage, do not expose the components to

rain or moisture.

Conditions for operation:

room temperature 5 – 35° C,

humidity 10 – 75%

It is intended to alert the user of the presence of uninsulated

"dangerous voltage" within the products enclosure. To avoid

electrical shock, do not open the cabinet of the components.

Excessive sound pressure levels might cause serious damage to

your health. Do not operate the speaker system at excessive levels

for a long period of time.

Should any solid object or liquid fall into the cabinet of the

components, unplug the unit and have it checked by qualified

personnel before operating it any further.

Unplug the components of your system from the wall outlet and

antenna if they are not to be used for an extended period of time. To

disconnect the power cord, pull it out by the plug. Do not pull the

cord itself. Never touch the plugs with wet hands.

Only let qualified personnel repair or reassemble the components

of the system.

These loudspeakers are designed for the playback of audio signals

for "Home & Office use" only. Any other use, especially in

PRIVATE USE ONLY

commercial applications, is expressly prohibited.

SAFETY INFORMATION

Do not move or carry the speakers by holding the horn assembly.

Place the components of the system on a flat solid surface.

To prevent internal heat build–up in the components, place units in

a location with sufficient air circulation. Do not install the speakers

in a location near heat sources such as radiators, or in a place

subject to direct sunlight, excessive dust, or mechanical vibration.

Connect everything securely. Always insert the plugs fully into the

jacks. A loose connection may cause hum pick-up and can damage

the system. Use only high–quality cables with self–tightening

banana speaker and RCA or XLR plugs.

To avoid damaging the finish, never use alcohol, paint thinner or

chemicals to clean the components.

Read this operators manual thoroughly before operating the

speaker system.

The electronic components & amplifiers are suitable for operating

voltages ranging from 90 – 250 Volt at 50 or 60 Hz.