Makita 6992D Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 6992D. Makita 6992D 17 pagina's. 9.6v cordless impact wrench
Ook voor Makita 6992D: Gebruiksaanwijzing (16 pagina's), Technische informatie (5 pagina's)
Pagina afdrukken
FUNCTIONAL
DESCRIPTION
2
1. Button
2. Battery cartridge
1
2
1. Battery cartridge
2. Charging light
3. Battery charger
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
002301
•
Always switch off the tool before insertion or removal of
1
the battery cartridge.
•
To remove the battery cartridge, withdraw it from the tool
while pressing the buttons on both sides of the cartridge.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the tool, causing injury to you or someone around you.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Charging
002308
1. Plug the battery charger into the proper AC voltage
source. The charging light will flash in green color.
2. Insert the battery cartridge so that the plus and minus
3
terminals on the battery cartridge are on the same sides
as their respective markings on the charger. Insert the
cartridge fully into the port so that it rests on the charger
port floor.
3. When the battery cartridge is inserted, the charging light
color will change from green to red and charging will
begin. The charging light will remain lit steadily during
charging.
4. When the charging light color changes from red to
green, the charging cycle is complete.
5. If you leave the battery cartridge in the charger after the
charging cycle is complete, the charger will switch into
its "trickle charge (maintenance charge)" mode which
will last approximately 24 hours.
6. After charging, unplug the charger from the power
source.
7