Makita 6994D Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Makita 6994D. Makita 6994D 12 pagina's.

Pagina afdrukken

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY CARTRIDGE

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise dam-

aged in any way; take it to a qualified service-

man.

10. Do not disassemble charger or battery car-

tridge; take it to a qualified serviceman when

service or repair is required. Incorrect reas-

sembly may result in a risk of electric shock or

fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

12. The battery charger is not intended for use by

young children or infirm persons without

supervision.

13. Young children should be supervised to

ensure that they do not play with the battery

charger.

14. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

15. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

ADDITIONAL SAFETY RULES FOR

CHARGER & BATTERY CARTRIDGE

ENC001-3

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

8. Be careful not to drop, shake or strike battery.

9. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

ADDITIONAL SAFETY RULES FOR

TOOL

1. Be aware that this tool is always in an operat-

ing condition, because it does not have to be

plugged into an electrical outlet.

2. Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring. Contact with a

''live'' wire will also make exposed metal parts

of the tool ''live'' and shock the operator.

3. Wear ear protectors.

4. Check the socket carefully for wear, cracks or

damage before installation.

5. Hold the tool firmly.

6. Always be sure you have a firm footing.

7. Be sure no one is below when using the tool in

high locations.

8. The proper fastening torque may differ

depending upon the kind or size of the bolt.

Check the torque with a torque wrench.

SAVE THESE INSTRUCTIONS.

ENB025-1