Makita 9911 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 9911. Makita 9911 8 pagina's. 76mm
Ook voor Makita 9911: Gebruiksaanwijzing (17 pagina's), Opsplitsing onderdelen (3 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (8 pagina's), Technische informatie (5 pagina's), Gebruiksaanwijzing (17 pagina's)
Pagina afdrukken
ENGLISH (Original instructions)
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In
observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Model
Belt size
Belt speed
Overall length
Net weight
Safety class
of
the
on
Waste
Electric
Equipment
environmentally
compatible
) : 83 dB (A)
pA
) : 94 dB (A)
WA
END201-7
Vibration
The
vibration
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
European
The declared vibration emission value may also be
•
and
used in a preliminary assessment of exposure.
and
its
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENE052-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENF002-1
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
ENG102-3
Designation of Machine:
Belt Sander
Model No./ Type: 9910,9911
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
2
9910
76 mm x 457 mm
270 m/min
262 mm
2.7 kg
/II
total
value
) : 2.5 m/s
h
2
Corporation
9911
75 - 270 m/min
ENG212-2
(tri-axial
vector
sum)
2
or less
ENG901-1
ENH101-16
as
the
responsible