James products ULTRA 8051 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} James products ULTRA 8051. James products ULTRA 8051 16 pagina's.
Pagina afdrukken
Other observations:
• Do not operate the product without filling the tank with water. Running dry will damage the unit.
• Do not plug in the power cord before adding water to the tank. To avoid overspill, do not fill the tank above
the 'Max' line.
• Do not use solution containing abrasive substances or strong corrosive chemical solution not
recommended by the manufacturer or the supplier.
• Place the device on a dry and flat surface for operation.
• When the device is subjected to severe electromagnetic interference, it may malfunction, stop operating or
lose control functions. If this happens, unplug the power cord then re-insert it to restart the device.
IMPORTANT SAFETY INSTRUCTIONS
When using electric appliances, basic precautions should always be followed, including the
following :
• Read all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
• Only use attachments recommended or sold by the manufacturer.
• Do not use outdoors.
• To disconnect, turn all controls to the off (O) position, then remove plug from outlet. Do not unplug by pulling
on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and before servicing
or cleaning.
• To reduce the risk of electrical shock, do not put the appliance in water or other liquid. Do not place or store
appliance where it can fall or be pulled into a tub or sink.
• All servicing of this product, including transducer replacement, is to be conducted by qualified service
personnel.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner.
• Return appliance to the nearest authorized service facility for examination, repair, or electrical or
mechanical adjustment.
Items Not Suitable for Ultrasonic Cleaning
Soft Jewellery:
Pearls, emerald, ivory, coral, agate,
sea turtle shells, etc
Welded, Plated and Glued Items:
Welded or plated metal items, glued items
Watches:
Except diver's watches with depth
rating over 50 m (150 ft)
Others:
Wood; coated glass, ceramic, camera
filters with pre-existing cracks.
SAFETY PRECAUTIONS
These items are not hard, so scratches may occur during cleaning.
Ultrasonic cleaning may enlarge the gaps inside the welded joints,
plated coating or glued items and may cause separation.
Because the strong penetration capability of the ultrasonic waves,
water may get into the watches if they are not truly waterproof.
Ultrasonic cleaning may enlarge the cracks pre-existed in the
coating on the glasses, ceramic, and glass. If the items have no
pre-existing cracks, then it is okay.
3