Makita BJR240 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita BJR240. Makita BJR240 12 pagina's. Cordless recipro saw
Ook voor Makita BJR240: Gebruiksaanwijzing (14 pagina's)

Makita BJR240 Gebruiksaanwijzing

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
1
2
001661
Always switch off the tool before insertion or
removal of the battery cartridge.
To remove the battery cartridge, withdraw it from
the tool while sliding the button on the side of the
cartridge.
To insert the battery cartridge, align the tongue on
the battery cartridge with the groove in the housing
and slip it into place. Always insert it all the way
until it locks in place with a little click. If you can see
the red part on the upper side of the button, it is not
locked completely. Insert it fully until the red part
cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
Do not use force when inserting the battery
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Adjusting the shoe
1
2
001663
When the blade loses its cutting efficiency in one place
along its cutting edge, reposition the shoe to utilize a
sharp, unused portion of its cutting edge. This will help to
lengthen the life of the blade. To reposition the shoe,
loosen the lever counterclockwise and slide the shoe
forward or back to the desired position. Then tighten the
lever clockwise to firmly secure the shoe.
1. Red part
2. Button
3. Battery cartridge
3
1. Lever
2. Shoe
Switch action
2
001664
CAUTION:
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, press in the lock-off button and pull the
switch trigger. The lock-off button can be pressed in from
either left or right side of the tool. Tool speed is increased
by increasing pressure on the switch trigger. Release the
switch trigger to stop.

Speed change

B
001665
CAUTION:
Always set the speed change lever fully to the
correct position. If you operate the tool with the
speed change lever positioned half-way, the tool
may be damaged.
Do not use the speed change lever while the tool is
running. The tool may be damaged.
To change the speed, first switch off the tool and then
slide the speed change lever to the A side (2) for high
speed or B side (1) for low speed. Be sure that the speed
change lever is set to the correct position before
operation. Use the right speed for your job.
6
1. Lock-off button
1
2. Switch trigger
1. Speed change
A
lever
1