Makita BJV180 Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita BJV180. Makita BJV180 13 pagina's. Cordless jig saw
Ook voor Makita BJV180: Opsplitsing onderdelen (3 pagina's), Specificatieblad (2 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's), Technische informatie (13 pagina's), Gebruiksaanwijzing (18 pagina's)
Pagina afdrukken
To trim edges or make dimensional adjustments, run the
blade lightly along the cut edges.
Metal cutting
Always use a suitable coolant (cutting oil) when cutting
metal. Failure to do so will cause significant blade wear.
The underside of the workpiece can be greased instead
of using a coolant.
Rip fence set (optional accessory)
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before installing or
removing accessories.
1.
Straight cuts
007496
1
2
3
007497
When repeatedly cutting widths of 160 mm or less, use of
the rip fence will assure fast, clean, straight cuts. To
install, insert the rip fence into the rectangular hole on the
side of the tool base with the fence guide facing down.
Slide the rip fence to the desired cutting width position,
then tighten the bolt to secure it.
2.
Circular cuts
007498
1. Rip fence
1
1. Hex wrench
2. Bolt
3. Fence guide
1
007499
When cutting circles or arcs of 170 mm or less in
radius, install the rip fence as follows.
Insert the rip fence into the rectangular hole on the
•
side of the base with the fence guide facing up.
Insert the circular guide pin through either of the
two holes on the fence guide. Screw the threaded
knob onto the pin to secure the pin.
Now slide the rip fence to the desired cutting radius,
•
and tighten the bolt to secure it in place. Then move
the base all the way forward.
NOTE:
Always use blades No. B-17, B-18, B-26 or B-27
•
when cutting circles or arcs.
Guide rail adapter set (accessory)
007500
When cutting parallel and uniform width or cutting
straight, the use of the guide rail and the guide rail
adapter will assure the production of fast and clean cuts.
To install the guide rail adapter, insert the rule bar into the
square hole of the base as far as it goes. Secure the bolt
with the hex wrench securely.
1
007501
Install the guide rail adapter on the rail of the guide rail.
Insert the rule bar into the square hole of the guide rail
adapter. Put the base to the side of the guide rail, and
secure the bolt securely.
10
1. Fence guide
2. Threaded knob
3. Circular guide
pin
2
3
1. Bolt
2. Rule bar
2