Makita BTL060Z Technische informatie - Pagina 7

Blader online of download pdf Technische informatie voor {categorie_naam} Makita BTL060Z. Makita BTL060Z 9 pagina's. Cordless angle impact drivers 14.4v/ 18v

Pagina afdrukken

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -3. Hammer Section (cont.)

ASSEMBLING

Note 3: Internal gear 69 is reversible when assembled to Housing L

although there is a notch on one of the two protrusions.

Note 4: When assembling DC Motor to Gear section, do not force

the pinion gear of DC Motor into Gear section.

Be sure to insert the pinion gear into three Spur gears (Spur gear 29)

while engaging them. Otherwise, DC Motor will run slower with

occasional siren-like noise. In this case, disassemble the machine

again, and insert the pinion gear correctly as described above.

Note 5: Do not forget to put the following parts in place before assembling

Housing R to Housing L (Fig. 13): Cushion, Pin 1.5, Rubber pin 5

Fig. 13

Cushion

Pin 1.5

P 7/ 9

Rubber pin 5