Garde 181LETCUT12 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Garde 181LETCUT12. Garde 181LETCUT12 4 pagina's. Lettuce cutters

Please read and comply with the instructions listed on this document. To get the best service life and

performance from your machine, clean it thoroughly before and after each use by following the instructions

listed below. Minimize the use of alkaline cleaners as they may dull the finish and cause pitting.

Safety Instructions

Be careful when handling and operating the machine, as the blades are very sharp. Always keep your hands

away from the blades. When not in use, use the ring pin to secure the machine in the down position.

Operation

1) Remove ring pin from lockdown position hole.

2) Insert ring pin into hole on handle.

3) Lift and hold the handle in the upright position and place a head of lettuce on the blade surface.

4) Remove hands and fingers from the cutting area.

5) Firmly push the handle down so that the push plate forces the product completely through the blades.

6) Clean the machine after chopping is complete using the cleaning instructions below.

7) Do not attempt to cut produce larger than the surface of the blade assembly.

Cleaning and Maintenance

1) Remove ring pin and use handle to lift push plate off of the guide rods.

2) Remove hold down clips and remove the blade assembly from the frame.

3) Use a damp cloth or sponge to wipe down the frame. Clean the push plate and blade assembly

thoroughly.

4) Make sure frame, blade assembly, and all other components are dried thoroughly.

5) Replace blade assembly, and then re-attach hold down clips.

6) When necessary, lubricate guide rods with mineral oil, food grade grease, or paraffin. Do not use

cooking oil.

7) Replace push plate then return handle to down position. Replace the ring pin for safe storage.

USER MANUAL