Makita BTW070 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita BTW070. Makita BTW070 12 pagina's.
Ook voor Makita BTW070: Technische informatie (6 pagina's), Gebruiksaanwijzing (16 pagina's)

Pagina afdrukken
Makita BTW070 Gebruiksaanwijzing
1
A
1. Reversing switch lever
(C)
E
E
ASSEMBLY
1
2
1. Socket
2. Anvil
6
Reversing switch action
001257
This tool has a reversing switch to change the direction of rotation. Depress
the reversing switch lever from the A side for clockwise rotation or from the B
side for counterclockwise rotation.
When the reversing switch lever is in the neutral position, the switch trigger
cannot be pulled.
B
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the
tool.
•
When not operating the tool, always set the reversing switch lever to the
neutral position.
The remaining Battery capacity
001258
F
F
CAUTION:
•
Always be sure that the tool is switched off and the battery cartridge is
removed before carrying out any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An incorrect size socket
will result in inaccurate and inconsistent fastening torque and/or damage to the
bolt or nut.
Installing or removing socket
005609
To install the socket, push it onto the anvil of the tool until it locks into place.
To remove the socket, simply pull it off.