Lexmark 12B0104 - W 820 B/W Laser Printer Snelle referentie - Pagina 2
Blader online of download pdf Snelle referentie voor {categorie_naam} Lexmark 12B0104 - W 820 B/W Laser Printer. Lexmark 12B0104 - W 820 B/W Laser Printer 2 pagina's. Online information
Ook voor Lexmark 12B0104 - W 820 B/W Laser Printer: Handboek Storingen verhelpen (2 pagina's), Problemen oplossen (1 pagina's)
Pagina afdrukken
Printing a menu settings page
To verify Paper Size and Paper Type settings, and check installed
options and memory, print a menu settings page:
1
Press Menu until you see Utilities Menu, and then press
Select.
2
Press Menu until you see Print Menus, and then press
Select.
Printing confidential jobs
If you want to print a job that is personal or confidential, and you do
not want anyone else to see it, the printer can hold your job in
memory until you arrive at the printer.
Note:
This only works with Lexmark W820 custom printer drivers.
These drivers can be found on the drivers CD that shipped
with your printer and on the Web at www.lexmark.com.
To a print confidential job:
1
In your word processor, spreadsheet, browser, or other
➤
application, select File
Print.
2
Click Properties (or Options, Printer, or Setup depending
on the application) to view the printer driver settings.
3
Click Help and refer to the topic confidential print or print and
hold. Follow the instructions.
4
Go to the printer when you are ready to retrieve your
confidential print job, and follow these steps:
a
On the operator panel, press Menu until you see
Confidential Job, and then press Select.
Enter PIN
=****
1
2
3
4
Menu
Select
Return
5
6
Go
Stop
b
Press Menu until you see your user name, and then press
Select.
c
Enter your four-digit PIN using the numbered buttons on
the operator panel. As you enter your PIN, asterisks
appear on the display.
d
Press Menu until you see Print A Job, and then press
Select. (Print All Jobs sends all jobs with the same user
name and PIN immediately to the printer.)
e
Press Menu until you see the job you want to print, and
then press Select.
f
Press Go to send the job to the printer.
After the job prints, the job is deleted from printer memory and the
printer returns to the Ready state.
Common printer messages
Message
Actions
• Remove the currently loaded print
Change Tray <x>
media from the specified tray, and
The printer is
then load the requested print media.
requesting a different
size or type of print
• Press Select to clear the message
media than what is
and print on the media currently
loaded.
loaded in the tray.
• Cancel the current job.
• Load the multipurpose feeder with the
Load MP Feeder
print media specified on the second
The printer is ready for
line of the display.
print media to be
inserted into the
• Press Select or Go to ignore the
multipurpose feeder.
manual feed request and print on print
media already installed in one of the
print media trays.
• Cancel the current job.
• Move the guide to the proper position
Check <source>
Paper Guide
or load the print media correctly.
The guide in the print
media source is set
incorrectly or the print
media is loaded
incorrectly.
Waiting
• Press Go to print the contents of the
buffer.
The printer has
received data to print
• Cancel the current job.
but is waiting for a
command or
additional data.
Message
Actions
Not Ready
• Press Go to ready the printer to
receive jobs.
The printer is not
ready to process data.
• Wait for the message to clear.
Flushing Buffer
The printer is
• Sometimes this message means the
discarding the current
driver data did not match what the
print job.
printer was expecting. If the situation
recurs, try printing from another
Lexmark W820 printer driver
(Lexmark W820 PS3 or Lexmark
W820).
• Press Go to reenter the PIN.
No Jobs Found.
Retry?
• Press Return until the printer returns
The PIN you entered
to the Ready state.
on the operator panel
does not match the
one you specified
when you sent the
print job.