HIKVISION DS-9600NI-ST Series Snelstarthandleiding - Pagina 7
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} HIKVISION DS-9600NI-ST Series. HIKVISION DS-9600NI-ST Series 13 pagina's. Cameras, dvrs
Ook voor HIKVISION DS-9600NI-ST Series: Beknopte handleiding (6 pagina's)
Pagina afdrukken
6. Recording
To setup recording schedule:
You can set the recording through two ways:
OPTION1:
Right click to access the menu. Select
the list, select either Continuous Record or Event Record.
This will apply a 24/7 recording for all active channels.
OPTION2:
1. Enter the Schedule Configuration menu by going
to Main Menu > Recording Configuration
> Schedule.
2. Select a camera to configure from the camera
drop down menu.
3. Check the Enable Schedule checkbox to enable the recording schedule. If the checkbox is
unchecked, the recording schedule will be disabled.
4. Click blue Continuous or yellow Event icon below time table to select recording type. The
time table will switch to editable mode, drag mouse over time table to configure recording
schedule. Different recording types will be marked with corresponding color.
Note: Step 4 scheduling adjustments made to the hour, if recording schedule requires
adjustments to the minutes, move to Step 7.
5. Select Recording Type for each day of the week. Recording type includes Continuous for
continuous recording or Event for recording when an event is triggered (i.e. from detected
motion) for the selected time period.
6. Select the start and stop time for each day of the week. The start and stop time are listed
using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm)
7. Select the Apply button to save the schedule settings and click
previous menu. Clicking
settings.
NOTE: Event recordings are recordings that are triggered from motion detection
and/or from an external alarm.
First Choice For Security Professionals
from
Start Recording
without clicking Apply will go out of the menu without saving
to return to the
www.hikvision.com