Garden Gear G1005 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Garden Gear G1005. Garden Gear G1005 16 pagina's.

Garden Gear G1005 Gebruiksaanwijzing
Press the safety lock switch and depress the on switch, the trimmer will start.
Practice with the shears flat at first with small areas until you are comfortable
and more confident then move to larger areas and use back and forth
sweeping movements cutting small amounts.
Work in straight rows keeping the head of the trimmer at the correct height
and not pointing down into the bush or hedge. Do not attempt to cut all at
one go, but take the top section off then move lower gradually as required.
Then cut the sides sweeping upwards. If necessary, use a length of string as a
guide to obtain straight edges.
Note: Releasing the on switch automatically re-engages the safety lock
switch.
Note: The telescopic handle is only designed for use with the short grass
cutting blade. Do not use with the hedge cutting blade attached.
Care and maintenance
Before each use check the trimming shears for any obvious defects such as
loose, worn or damaged parts.
Do not use the trimming shears if there is any sign of damage.
Check the outer sections of the body for any damage and if present get a
qualified person to replace.
Carry out the following maintenance and cleaning work regularly:
Every time you use the trimming shears clean all parts especially the
blades. Remove any moisture, debris or dust and store in a clean dry
environment.
Do not use or submerge the trimming shears in water or use cleaning
agents or solvents, these may damage the trimming shears.
Do not try to service the trimming shears yourself, always take it to a
qualified repair person.
We recommend using a small amount of lubricating oil, periodically, to
keep your blades in a good condition.
Li-Ion battery care & maintenance
Lithium-Ion rechargeable batteries require routine maintenance and care in
their use and handling. Read and follow the guidelines to safely use Lithium-
Ion batteries and achieve the maximum battery life span.
Do not leave batteries unused for extended periods of time, either in
the machine or in storage. When a battery has been unused for 3
months or more, check the charge status and charge or dispose of the
battery as appropriate.
The typical estimated life of a Lithium-Ion battery is about two years or
300 charge cycles, whichever occurs first. One charge cycle is a period
of use from fully charged, to fully discharged, and fully recharged
again.
12