Makita DJV184RTJ Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita DJV184RTJ. Makita DJV184RTJ 17 pagina's.

Fig.8

► 1 . Jig saw blade holder 2. Jig saw blade 3. Roller

CAUTION:

If the blade clamp lever does not

move to the fixed position, the jig saw blade is

not installed completely. Do not press the blade

clamp lever by hand to the fixed position. It may

damage the tool.

To remove the jig saw blade, push the blade clamp lever

forward as far as it will go. This allows the jig saw blade

to be released.

Fig.9

► 1 . Jig saw blade holder 2. Blade clamp lever 3. Jig

saw blade

NOTE: In case that it is difficult to remove the jig saw

blade:

Turn the cutting action changing lever to the position

"III" and move the jig saw blade holder to the bottom

before pushing the blade clamp lever to the released

position. To move the jig saw blade holder to the

bottom, return the blade clamp lever fully to the fixed

position once and slightly switch on the tool several

times.

NOTE: Occasionally lubricate the roller.

When not in use, store the hex wrench as shown in the

figure to keep it from being lost.

Fig.10

► 1 . Hex wrench

Fig.11

► 1 . Cutting line 2. Base

Turn the tool on without the jig saw blade making any

contact and wait until the blade attains full speed. Then

rest the base flat on the workpiece and gently move the

tool forward along the previously marked cutting line.

10 ENGLISH

Hex wrench storage

OPERATION

CAUTION:

Always hold the base flush with

the workpiece. Failure to do so may cause jig saw

blade breakage, resulting in a serious injury.

CAUTION:

Advance the tool very slowly when

cutting curves or scrolling. Forcing the tool may

cause a slanted cutting surface and jig saw blade

breakage.