AVANTO CLIP-ON LIGHT PRO Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AVANTO CLIP-ON LIGHT PRO. AVANTO CLIP-ON LIGHT PRO 4 pagina's.
Ook voor AVANTO CLIP-ON LIGHT PRO: Instructies (2 pagina's)
CHARGING
The battery is charged at the factory and the light is ready for use immediately. Open
the protective cover and connect the supplied USB cable to the charging socket (C),
connect the other end of the cable to a suitable USB power supply (eg mobile phone
charger, computer, avoid high power chargers, they may damage the battery!)
You can see the battery charge status
when charging from the light (D)
Reservation
Green
Battery full
Red
Loading
D
*battery charge status light
Important! Do not leave the light on unattended! Your light has a Lithium polymer-type batte-
ry. Such a battery gives off power and the light is on brightly and does not dim until the power
is almost exhausted. When the light clearly begins to dim and the charge level shows one light,
the battery is almost exhausted, then turn off the light. Deep battery discharge will dama-
ge the battery and shorten battery life. The battery lasts for about 600 charges when used
correctly. If the light is not used for a long time, charge it before storage to prevent deep
discharge of the battery.